Departmental (other) • 2025 • Paper-II
From the following choose which comes under the minor penalty
A)
Removal from service
B)
Dismissal from service
C)
Compulsory retirement
D)
Withholding increments of pay
Option D is correct: Withholding increments of pay.
Departmental (other) • 2025 • Paper-II
Measurement Book records quantify/value of work done by:
A)
Work charged establishment and contractors
B)
Muster roll labour & Works charged establishment
C)
Daily labours &contractors
D)
Contractors
Option A is correct: Work charged establishment and contractors.
Departmental (other) • 2025 • Paper-II
The general principles to be followed in the classification of Public Works Expenditure are laid down in:
A)
Government Accounting Rules, 1990
B)
General Financial Rules, 2005.
C)
Works Manual
D)
Public Works Account Code.
Option D is correct: Public Works Account Code..
Departmental (other) • 2025 • Paper-II
Who is the competent authority for appointment of an inquiry officer in a departmental proceeding?
A)
Head of Department
B)
Presenting Officer
C)
Head of Office
D)
Disciplinary Authority
Option D is correct: Disciplinary Authority.
Departmental (other) • 2025 • Paper-II
A government servant publicly opposes the ‘Hand-holding’ Policy in a blog post. Under which rule is this a violation?
A)
Rule 22 – Misuse of media
B)
Rule 3-B – Non-compliance with Government’s policies
C)
Rule 3-C – Harassment
D)
Rule 7 – Political activity
Option B is correct: Rule 3-B – Non-compliance with Government’s policies.
Departmental (other) • 2025 • Paper-II
An amount of 64,000 was payable in 1st running account bill which included advance payment 15,000 and recovery of fine for bad work `1000. The 2.5% Security deposit recoverable is
A)
1625
B)
1600
C)
1250
D)
1225
Option D is correct: 1225.
Departmental (other) • 2025 • Paper-II
What constitutes a ‘Strike’?
A)
submission of joint representation by employees
B)
unauthorised participation in general body meeting
C)
refusal to work or stoppage or slowing down of work by a group of employees
D)
Lawful gathering employees at one place within the office premises
Option C is correct: refusal to work or stoppage or slowing down of work by a group of employees.
Departmental (other) • 2025 • Paper-II
As per CCS (Conduct) Rules 1964, Rule 7, a government servant shall not:
A)
Join professional associations
B)
Take part in elections to cooperative societies
C)
Participate or be associated with any political activity
D)
Take casual leave for voting
Option C is correct: Participate or be associated with any political activity.
Departmental (other) • 2025 • Paper-II
The maximum period of leave of any which can be allowed to a government servant is-
A)
5 Years
B)
7 years
C)
3 years
D)
2 years
Option C is correct: 3 years.
Departmental (other) • 2025 • Paper-II
Part I of the Audit Note and the Inspection Report should be returned to the Audit Officer through the:
A)
Superintending Engineer
B)
Chief Engineer
C)
Divisional Officer
D)
Any Superior Officer
Option C is correct: Divisional Officer.
Departmental (other) • 2025 • Paper-II
What is soldering? Describe the features of soldering process.
Departmental (other) • 2025 • Paper-II
Describe the uses of PERT and CPM in Operation Research.
Departmental (other) • 2025 • Paper-II
NPSH testing determines the pump ability to handle suctions conditions and-
A)
Prevents cavitation
B)
Head
C)
Current
D)
Weight
Option A is correct: Prevents cavitation.
Departmental (other) • 2025 • Paper-II
What is water supply plan management? Describe the main features of water supply management plant.
Departmental (other) • 2025 • Paper-II
Describe the process of Shielded Metal Arc Welding (SMAW) and it advantages for welding water pipes.
Departmental (other) • 2025 • Paper-II
The total head is the total energy required to move the fluid including friction head loss in the pipe and-
A)
Static head
B)
Atmospheric pressure
C)
Temperature
D)
Thermal effect
Option A is correct: Static head.
Departmental (other) • 2025 • Paper-II
Explain the working principle of air compressor and its uses.
Departmental (other) • 2025 • Paper-II
In pump house, monitoring and controlling of pumps including start/stop functions, flow rate and alarms is done by using-
A)
Substation
B)
Control panel
C)
Transformer
D)
Isolator
Option B is correct: Control panel.
Departmental (other) • 2025 • Paper-II
An iron having superior corrosion resistance due to zinc coating is called-
A)
Forged iron
B)
Galvanised Iron
C)
Tinning
D)
Cast Iron
Option B is correct: Galvanised Iron.
Departmental (other) • 2025 • Paper-II
What is grinding machine? Describe its applications.
Departmental (other) • 2025 • Paper-II
Describe the selection criteria and layout planning of water pumping station.
Departmental (other) • 2025 • Paper-II
Testing method focussing on measuring temperature, power consumed and differential pressure to assess pump efficiency is called-
A)
Head testing
B)
Discharge testing
C)
Vibration testing
D)
Thermodynamic testing
Option D is correct: Thermodynamic testing.
Departmental (other) • 2025 • Paper-II
The arithmetic increase method of population projection is calculated by adding average population increase per decade to the-
A)
Current population
B)
Previous population
C)
Average population
D)
Project population
Option A is correct: Current population.
Departmental (other) • 2025 • Paper-II
Machines that enlarge or refine existing holes in a material like wood, metal or concrete are called-
A)
Clipping Machine
B)
Boring machine
C)
Sewing machine
D)
Cutting machine
Option B is correct: Boring machine.
Departmental (other) • 2025 • Paper-II
For maintenance of battery, check electrolyte levels and-
A)
Position
B)
Inclination
C)
Weight
D)
Specific gravity
Option D is correct: Specific gravity.
