Motor Vehicle Inspector • 2025 • Paper-III
SUV stands for:
A)
Sports Utility Vehicle
B)
Super Utility Van
C)
Special Urban Vehicle
D)
Speed Utility Vehicle
Option A is correct: Sports Utility Vehicle.
Motor Vehicle Inspector • 2025 • Paper-III
Reversibility of the steering system allows:
A)
Self-centering of the steering wheel
B)
High steering effort
C)
Constant speed at turns
D)
More wheel alignment
Option A is correct: Self-centering of the steering wheel.
Motor Vehicle Inspector • Paper-II
The steering ratio for manual steering of cars is approximately
A)
5
B)
15
C)
500
D)
100
Based on established principles in the relevant subject area, the correct and most appropriate choice is '100' (Option D).
Motor Vehicle Inspector • Paper-II
When jump starting a car, we use the battery from another car which is called as
A)
support battery
B)
package battery
C)
booster battery
D)
additional battery
Based on established principles in the relevant subject area, the correct and most appropriate choice is 'support battery' (Option A).
Motor Vehicle Inspector • Paper-II
The friction disc is positioned between the flywheel and the
A)
engine
B)
crankshaft
C)
pressure plate
D)
differential
Based on established principles in the relevant subject area, the correct and most appropriate choice is 'engine' (Option A).
Motor Vehicle Inspector • Paper-II
The propeller shaft lies between
A)
the transmission and the front wheels
B)
the differentials and the front wheels
C)
the transmission and the differential
D)
none of these
Based on established principles in the relevant subject area, the correct and most appropriate choice is 'the transmission and the front wheels' (Option A).
Motor Vehicle Inspector • Paper-II
Another name for the steering link rod is
A)
track rod
B)
tie rod
C)
drag link
D)
pitman
Based on established principles in the relevant subject area, the correct and most appropriate choice is 'tie rod' (Option B).
Motor Vehicle Inspector • Paper-II
A simple mechanism consists of a mechanism with
A)
two links
B)
four links
C)
six links
D)
eight links
Based on established principles in the relevant subject area, the correct and most appropriate choice is 'eight links' (Option D).
Motor Vehicle Inspector • Paper-II
The Universal joints takes care of the
A)
change in length
B)
change in drive angle
C)
change in drive speed
D)
change in gear shift
Based on established principles in the relevant subject area, the correct and most appropriate choice is 'change in drive speed' (Option C).
Motor Vehicle Inspector • Paper-II
The distance between the centres of the front wheel is called the
A)
track
B)
wheel base
C)
axle width
D)
turning circle
Based on established principles in the relevant subject area, the correct and most appropriate choice is 'wheel base' (Option B).
Motor Vehicle Inspector • Paper-II
The included angle is the sum of
A)
camber and castor
B)
castor and SAI
C)
camber and SAI
D)
camber and toe-in
Based on established principles in the relevant subject area, the correct and most appropriate choice is 'camber and castor' (Option A).
Motor Vehicle Inspector • Paper-II
You can quick charge the battery at as much as 50 amperes provided
A)
the electrolyte does not get too hot
B)
you do not charge for more than 5 minutes
C)
you make sure the battery is fully charged
D)
it remains connected to the electrical system
Based on established principles in the relevant subject area, the correct and most appropriate choice is 'you make sure the battery is fully charged' (Option C).
Motor Vehicle Inspector • Paper-II
Theory of machine is the branch of science, which deals with the study of
A)
the relative motion between the parts of a machine and the study of forces which acts on those parts
B)
the relative motion between the parts of a machine
C)
the forces acting on the parts of the machine
D)
none of these
Based on established principles in Mechanical Engineering, the correct and most appropriate choice is 'the relative motion between the parts of a machine' (Option B).
Motor Vehicle Inspector • Paper-II
Air Brakes are mostly used in case of
A)
cars
B)
jeeps
C)
trucks
D)
three wheelers
Based on established principles in the relevant subject area, the correct and most appropriate choice is 'jeeps' (Option B).
Motor Vehicle Inspector • Paper-II
The power steering has distinct advantage over the manual steering as
A)
the steering effort is considerably reduced
B)
in a power steered vehicle, there is less driver fatigue
C)
power steering leads to greater safety
D)
all of these
Based on established principles in the relevant subject area, the correct and most appropriate choice is 'all of these' (Option D).
Motor Vehicle Inspector • Paper-II
Another name for a damper is
A)
shock absorber
B)
torsion bar
C)
spring
D)
independent suspension
Based on established principles in the relevant subject area, the correct and most appropriate choice is 'shock absorber' (Option A).
Motor Vehicle Inspector • Paper-II
When a two wheeler (e.g. bike) move over a curved path, it is always inclined at an angle, say, theta(q), with the vertical plane. This angle is known as
A)
skid angle
B)
angle of heel
C)
angle of engine
D)
angle of rider
Based on established principles in the relevant subject area, the correct and most appropriate choice is 'angle of heel' (Option B).
Motor Vehicle Inspector • Paper-II
Which of the following is not a type of steering gear?
A)
worm and roller
B)
cam and roller
C)
bevel and spur
D)
worm and ball bearings
Based on established principles in the relevant subject area, the correct and most appropriate choice is 'bevel and spur' (Option C).
Motor Vehicle Inspector • Paper-II
The two qualities used for specifying an electrical wire are
A)
the colour and length
B)
the length and diameter
C)
the diameter and number of strands
D)
the colour and diameter
Based on established principles in the relevant subject area, the correct and most appropriate choice is 'the colour and length' (Option A).
Motor Vehicle Inspector • Paper-II
The output of an alternator is controlled by
A)
voltage regulator
B)
cutout relay
C)
current regulator
D)
all of these
Based on established principles in the relevant subject area, the correct and most appropriate choice is 'all of these' (Option D).
Motor Vehicle Inspector • Paper-II
Spring eyes in case of cars are usually lined with
A)
bronze bushes
B)
rubber bushes
C)
steel bushes
D)
metal bushes
Based on established principles in the relevant subject area, the correct and most appropriate choice is 'steel bushes' (Option C).
Motor Vehicle Inspector • Paper-II
The Horse power transmitted by a belt is equal to (Where T1 = Tension on tight side, T2 = Tension on slack side, V = linear velocity of belt)
A)
(T1 * V) / 75
B)
(T2 * V) / 75
C)
((T1 + T2) * V) / 27.5
D)
((T1 - T2) * V) / 75
Based on established principles in the relevant subject area, the correct and most appropriate choice is '(T2 * V) / 75' (Option B).
Motor Vehicle Inspector • Paper-II
Two parallel and co-planar shafts are connected by gears, this type of gears is called
A)
helical gear
B)
spur gear
C)
bevel gear
D)
spiral gear
Based on established principles in the relevant subject area, the correct and most appropriate choice is 'bevel gear' (Option C).
Motor Vehicle Inspector • Paper-II
In a pitman – arm steering system, the steering arm is adjacent to the
A)
pitman arm
B)
relay rod
C)
tie rod
D)
idler arm
Based on established principles in the relevant subject area, the correct and most appropriate choice is 'tie rod' (Option C).
Motor Vehicle Inspector • Paper-II
A good suspension system should have
A)
springiness and damping
B)
only springiness
C)
only damping
D)
none of these
Based on established principles in the relevant subject area, the correct and most appropriate choice is 'springiness and damping' (Option A).
